FAQ Search Select a Category Cleaning Formulas Cleaning Tips Commercial Products Corporate Deep Cleaners Hard Floor Cleaners Mops, Brooms and Brushes Parts and Accessories Steam Sweepers Vacuums Warranty Web Site and/or go The brush is not rotating on my machine. What should I check? Answer: Please ensure your machine is unplugged from the outlet prior to trying the following: Remove the 4 screws from the bottom of the machine. Also remove the screw located in the middle of the plate directly above the brush. Lift the access plate off. Grasp the Rotating Floor Brush at both ends and lift. Clean strings, hair and other debris from Rotating Floor Brush, paying particular attention to brush ends. Clean strings, hair and other debris from Motor Pulley and Drive Belt areas. Check the belt to ensure it is not broken. If it is, the replacement belt should be either a Style 7,9, or 10. If your brush still does not rotate, please take your machine to a local BISSELL Authorized Service Center. To locate your nearest BISSELL Authorized Service Center, click here. You can also locate a Service Center by phone, 24 hours a day, by calling 1-800-237-7691 and choosing option #1. Related Questions Why is my vacuum sounding loud? What should I check? Why is the brush roll on my Lift-Off® Floors & More not turning? My AeroSwift® Vacuum has no power. What should I do? The brush on my Powerlifter® (1307 & 1309 models) is not spinning. What do I check?