FAQ Search Select a Category Cleaning Formulas Cleaning Tips Commercial Products Corporate Deep Cleaners Hard Floor Cleaners Mops, Brooms and Brushes Parts and Accessories Steam Sweepers Vacuums Warranty Web Site and/or go My PowerForce® Bagless vacuum is very loud. What can I check? Answer: Check the inner and outer circular filters and the post-motor filter for debris. The inner and outer circular filters are the lower half of the dirt container. These can be rinsed. The post-motor filter is covered by a plastic grate just below the dirt container. Check the upper tank’s primary separator. This is the grey plastic part of the upper tank (it’s covered in louvers). You can simply unscrew it and rinse it with water. Note: Failure to properly maintain the filters could result in damage to the motor. A clogged hose may also cause the unit to sound abnormal—see our “PowerForce Clearing Clogs” FAQ if necessary. If you still experience excessive noise at this point it might be best to take your vacuum to a technician. You can find your nearest BISSELL® Authorized Service Center by clicking http://www.bissell.com/support/product-support/service-centers/ or by calling 1-800-237-7691, available 24 hours a day. Related Questions Why is my vacuum sounding loud? What should I check? Why is the brush roll on my Lift-Off® Floors & More not turning? The brush on my Powerlifter® (1307 & 1309 models) is not spinning. What do I check? My AeroSwift® Vacuum has no power. What should I do?