FAQ Search Select a Category Cleaning Formulas Cleaning Tips Commercial Products Corporate Deep Cleaners Hard Floor Cleaners Mops, Brooms and Brushes Parts and Accessories Steam Sweepers Vacuums Warranty Web Site and/or go My Spot Lifter Cordless Deep Cleaner will not spray. What can I do to correct this? Answer: Make sure there is water/formula in the solution tank. Check to see if water comes through the cap insert by pressing into the "X" valve. If the water does not release, soak cap insert in warm water for 30 minutes. If water does come through the "X" valve, remove the collection tank, turn the machine on and press the trigger to see if water/solution will come through the white spray nozzle on the machine base. If not, gently clean by inserting a paperclip into the opening. If water/solution will spray through the spray nozzle on the machine base, the spray tip at the end of the collection tank may be clogged. Try soaking the collection tank in warm water for 30 minutes. If you require additional assistance, please call BISSELL Consumer Services at 1-800-237-7691 Monday through Friday from 8am-10pm or Saturdays from 9am to 8pm ET. Related Questions My ProHeat® Self-Propelled's Powerdrive isn't engaging. What can I do? My machine sprays water but no shampoo, what can I check? The Cleanshot® feature on my Deep Clean Premier® will not spray, what do I do? My Deep Clean Premier® is leaving dirty spots on the carpet. What do I do?