FAQ Search Select a Category Cleaning Formulas Cleaning Tips Commercial Products Corporate Deep Cleaners Hard Floor Cleaners Mops, Brooms and Brushes Parts and Accessories Steam Sweepers Vacuums Warranty Web Site and/or go My SpotClean Pro™ leaks. How can I fix this? Answer: Let’s start by checking for cracks in dirty water tank. Make sure the tank isn’t overfilled past the ‘full’ line. Always empty the tank if it’s full or nearly full. Check the suction gate area and clean if needed (if any hair/debris is visible). Next, check for cracks in the hose- if it is cracked, please take the machine to an Authorized Service Center to replace the hose. To find one near you, see below. If you’re not pressing the trigger, make sure that the cap and gasket are on securely in the water tank. If you’re still stuck, at this point it might be best to take your Spot Clean to a technician. You can find your nearest BISSELL® Authorized Service Center by clicking http://www.bissell.com/support/product-support/service-centers or by calling 1-800-237-7691, available 24 hours a day. Related Questions My ProHeat® Self-Propelled's Powerdrive isn't engaging. What can I do? My machine sprays water but no shampoo, what can I check? The Cleanshot® feature on my Deep Clean Premier® will not spray, what do I do? My Deep Clean Premier® is leaving dirty spots on the carpet. What do I do?