How To Deep Clean
Deep cleaning is almost as easy as vacuuming your carpets! The three steps below will walk you through the process. We also have videos demonstrating deep cleaning available in the Visual Learning section of the Cleaning & Maintenance area.
If you have any additional questions that are not covered here, please don't hesitate to contact us here.
- Vacuum area with a dry vacuum cleaner thoroughly before deep cleaning.
- Add BISSELL formula to your deep cleaning machine as stated on your machine’s instructions.
- Next, add hot tap water (not boiling water) to the deep cleaning machine.
- Plug in the machine, turn it on, and start deep cleaning. While pressing the trigger, make one slow forward wet pass and another one back. Let the built-in heater, formula, and brushes do the work for you.
- When you have run out of clean water, remove the tank from the base of the machine and carry like a bucket to a utility sink or outside. Pour out dirty water through the triangular shaped opening in the corner of the tank.
- Refill the bladder with clean hot tap water, repeating the steps above, until you have finished cleaning the room.
- Put your deep cleaning machine away and relax while enjoying your beautiful floors!
For more detailed instructions and tips, refer to your machine's user guide. If you have a specific stain you are trying to clean, check out our Stain Guide.