How do I clear clogs in my Garage Pro®?
Answer: 1. If you find a clog near the top of the hose, attach the hose to the wet/dry inlet and turn the power on. This should dislodge the clog by sucking in the debris.
2. If you find a clog near the bottom of the hose (near where the tools attach), remove the wand or tool and attach the hose to the blower outlet. Turn the power on. This should dislodge the clog by blowing out the debris.
3. If the clog isn’t removed, completely remove the hose from the vacuum and find the clog by hand. Squeeze the hose and shake until the debris dislodges.
4. Check wet/dry inlet and the blower outlet for clogs.