My CleanView Bagless Power Trak vacuum does not have any power. What should I check?
Answer: Make sure the power cord was plugged into a working outlet. If it was, unplug the machine and try the following. Reduced air-flow from dirty filters or from clogs in the hose will put greater stress on the motor, increasing the possibility for overheating. - Check the Upper-tank, Pre and Post-motor filters for debris. Clean if dirty. The black filters can be washed in warm water and mild soap. Ensure the filters are dry prior to using them again. - The large hose can be cleared of clogs by removing the hose from the back of the machine. Using a broomstick handle, push any dirt or debris through the hose. - The lower hose can be cleared by first removing the screw and then lowering the hose for cleaning. If you continue to experience no power, please take your machine to a local BISSELL Authorized Service Center. To locate your nearest BISSELL Authorized Service Center, go to the BISSELL Homepage at: http://www.bissell.com. Select the "Customer Service" tab at the top of the page and then select "Service Centers" from the drop down menu. Enter your zip code to perform your search. You can also locate a Service Center by phone, 24 hours a day, by calling 1-800-237-7691 and choosing option #1.