Powersteamer deep cleaner - no spray
Answer: -Make sure there is a full tank of water.
-Check for the black or red tank gasket on the bottom of the tank and tank assembly. If the gasket is lodged in the base of unit or has been lost, reattach the gasket by pushing the rounded portion of the gasket over the lip on the autoload assembly.
-Check the valve on the bottom of the tank and tank to make sure water will come through when the X valve is depressed.
-Check if the small rounded window tabs on the floor nozzle are locked in their mating slots and not inadvertently lifting the tank up out of place.
-Check the handle screw on the back of the unit. The screw head should be bottomed out in the screw hole.
- Unit may have lost prime. To prime, replace the full tank into unit and hold the trigger in for 30 seconds with the unit turned off. Turn unit on to check for spray.
-Check the pump belt to ensure this is intact. The belt is located on the side of the machine. Pry up the belt access panel for access to pump belt. If the belt is broken, refer to user guide for replacment.
If the machine is still not functioning properly, please contact your local BISSELL Authorized Service Center for additional assistance. To locate your nearest BISSELL Authorized Service Center, go to the BISSELL Homepage at: http://www.bissell.com. Select Customer Support at the top of the home page. Enter your zip code to perform your search in the Zip Code locator box. You can also locate a Service Center by phone, 24 hours a day, by calling 1-800-237-7691 and choosing option #1.